News > Current News > Test Connectors for USB, RJ, HDMI

CONTACTS
FOR USB, RJ
AND HDMI...

Variety of test connectors and holding devices

Test Connectors with New Holding Device

The use of standard interfaces like USB, Mini-USB, Micro-USB, RJ- and HDMI in electrical devices is strongly increasing. And so is the portfolio of FEINMETALL test connectors. Currently available are test connectors for the following interfaces: 

  • Micro USB, Mini USB, USB 2.0, USB 3.0
  • HDMI 1.4, HDMI 2.0
  • RJ-9, RJ-11, RJ-45, RJ-50
  • RCA
  • F-Type


Corresponding holding devices are available for all test connectors. They allow an easy and reliable mounting and have some significant advantages:

  • The test connectors are floatingly mounted 
  • A centric seat of the test connector allows parallel movements 
  • A centric fixing within the holding device and the floating behavior even allows a certain twist of up to 1,8° ±0,2°
  • The holding devices have a life cycle of more than 500 000 movements
  • Simple fixing of the holding devices only with two screws
  • Simple fixing of the test connector in the holding device only with one fixing-screw
  • Each test connector has sufficient areas with metal surfaces on both sides to allow fixing the test connector at different positions and even mounting it upside down

 

All specifications, CAD files and mounting instructions