Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | F040 |
| Paso (mm/mil) | 1,00 / 40 |
| Temperatura | -45°C...+80°C |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 35.9 |
| Altura sobresaliente (mm) | 7 |
| Diámetro del estilo de punta (mm) | 0.38 |
| Diámetro del casquillo (mm) | 0.62 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 43 |
| Material del émbolo | Steel |
| Recubrimiento del émbolo | Longtime Gold |
| Material del casquillo | Bronze |
| Recubrimiento del casquillo | Gold |
| Material del resorte | Spring steel |
| Recubrimiento del resorte | Gold |
| Especificaciones mecánicas | |
|---|---|
| Precarga (cN) | 40 |
| Fuerza del resorte (cN) | 80 |
| Recorrido nominal (mm) | 4.3 |
| Recorrido máximo (mm) | 6.4 |
| Precisión de punteo +/- (mm) | 0.05 |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 2 |
| Resistencia de contacto típica (mΩ) | 20 |
Gráficos
Beschreibung des Produkts
F04043S038L080 (item number 1000146) is a Basic Contact Probe for repeatable temporary connections between the test system and a test point. With tip style 43 (Square lance 90°), F04043S038L080 combines ICT/FCT use with a geometry intended for vias and solder pads where the edges can break through residues and oxide layers. F04043S038L080 combines a pitch of 1 mm / 40 mil with tip style 43 (Square lance 90°) and a tip diameter of 0.38 mm. For F04043S038L080, spring force is 80 cN at a nominal travel of 4.3 mm. F04043S038L080 is rated for 2 A continuous current with a typical contact resistance of 20 mΩ. The plunger in F04043S038L080 is made of steel and uses Longtime Gold plating.