Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | F772 |
| Paso (mm/mil) | 2,54 / 100 |
| Temperatura | -45°C...+80°C |
| Definición adicional | EXX |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 33 |
| Altura sobresaliente (mm) | 11 |
| Diámetro del estilo de punta (mm) | 2 |
| Diámetro del casquillo (mm) | 1.66 |
| Diámetro del collar (mm) | 2.05 |
| Diámetro del anillo de presión (mm) | 2.05 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 63 |
| Material del émbolo | Steel |
| Recubrimiento del émbolo | Longtime Gold |
| Material del casquillo | Nickel silver |
| Recubrimiento del casquillo | Gold |
| Material del resorte | Spring steel |
| Recubrimiento del resorte | Silver |
| Especificaciones mecánicas | |
|---|---|
| Precarga (cN) | 80 |
| Fuerza del resorte (cN) | 300 |
| Recorrido nominal (mm) | 4 |
| Recorrido máximo (mm) | 5 |
| Precisión de punteo +/- (mm) | 0.08 |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 5 |
| Resistencia de contacto típica (mΩ) | 25 |
Gráficos
Beschreibung des Produkts
The Basic Contact Probe F77263S200L300E11 (item number 1010118) is a spring-loaded probe for temporary electrical contact with test points. With tip style 63 (8-point crown stepped (self-cleaning)), F77263S200L300E11 combines ICT/FCT use with a geometry intended for wire-wrap posts, including contacts that are slightly bent or twisted. F77263S200L300E11 combines a pitch of 2.54 mm / 100 mil with tip style 63 (8-point crown stepped (self-cleaning)) and a tip diameter of 2 mm. For F77263S200L300E11, spring force is 300 cN at a nominal travel of 4 mm. F77263S200L300E11 is rated for 5 A continuous current with a typical contact resistance of 25 mΩ. The plunger in F77263S200L300E11 is made of steel and uses Longtime Gold plating.