Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | F075HP |
| Paso (mm/mil) | 1,90 / 75 |
| Temperatura | -45°C...+80°C |
| Definición adicional | HP |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 33.1 |
| Altura sobresaliente (mm) | 8.2 |
| Diámetro del estilo de punta (mm) | 0.64 |
| Diámetro del casquillo (mm) | 1.02 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 43 |
| Material del émbolo | Steel |
| Recubrimiento del émbolo | Progressive |
| Material del casquillo | Bronze |
| Recubrimiento del casquillo | Gold |
| Material del resorte | Spring steel |
| Recubrimiento del resorte | Silver |
| Especificaciones mecánicas | |
|---|---|
| Precarga (cN) | 130 |
| Fuerza del resorte (cN) | 250 |
| Recorrido nominal (mm) | 4.3 |
| Recorrido máximo (mm) | 6.4 |
| Precisión de punteo +/- (mm) | 0.08 |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 4 |
| Resistencia de contacto típica (mΩ) | 40 |
Gráficos
Beschreibung des Produkts
The Basic Contact Probe F07543S064P250HP (item number 1010170) is a spring-loaded probe for temporary electrical contact with test points. With tip style 43 (Square lance 90°), F07543S064P250HP combines ICT/FCT use with a geometry intended for vias and solder pads where the edges can break through residues and oxide layers. F07543S064P250HP combines a pitch of 1.9 mm / 75 mil with tip style 43 (Square lance 90°) and a tip diameter of 0.64 mm. For F07543S064P250HP, spring force is 250 cN at a nominal travel of 4.3 mm. The electrical rating of F07543S064P250HP combines 4 A continuous current with 40 mΩ typical contact resistance. The combination of P-Coating and HP spring preload makes F07543S064P250HP a version for contact points where residues or hard surface layers can make electrical contacting more demanding.