Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | F075HP |
| Paso (mm/mil) | 1,90 / 75 |
| Temperatura | -45°C...+80°C |
| Definición adicional | HPL |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 35.1 |
| Altura sobresaliente (mm) | 10.2 |
| Diámetro del estilo de punta (mm) | 0.64 |
| Diámetro del casquillo (mm) | 1.02 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 43 |
| Material del émbolo | Steel |
| Recubrimiento del émbolo | Progressive |
| Material del casquillo | Bronze |
| Recubrimiento del casquillo | Gold |
| Material del resorte | Spring steel |
| Recubrimiento del resorte | Silver |
| Especificaciones mecánicas | |
|---|---|
| Precarga (cN) | 120 |
| Fuerza del resorte (cN) | 200 |
| Recorrido nominal (mm) | 4.3 |
| Recorrido máximo (mm) | 6.4 |
| Precisión de punteo +/- (mm) | 0.08 |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 4 |
| Resistencia de contacto típica (mΩ) | 40 |
Gráficos
Beschreibung des Produkts
As a Basic Contact Probe, F07543S064P200HPL (item number 1010289) establishes a spring-loaded electrical connection to the test point. With tip style 43 (Square lance 90°), F07543S064P200HPL combines ICT/FCT use with a geometry intended for vias and solder pads where the edges can break through residues and oxide layers. F07543S064P200HPL combines a pitch of 1.9 mm / 75 mil with tip style 43 (Square lance 90°) and a tip diameter of 0.64 mm. F07543S064P200HPL operates with 200 cN spring force and 4.3 mm nominal travel. The electrical rating of F07543S064P200HPL combines 4 A continuous current with 40 mΩ typical contact resistance. For demanding test points, F07543S064P200HPL combines functional Progressive Coating with the higher preload of the HP spring, supporting reliable contact on OSP surfaces and areas affected by flux or contamination.