Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | F100HP |
| Paso (mm/mil) | 2,54 / 100 |
| Temperatura | -45°C...+80°C |
| Definición adicional | HP |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 33.3 |
| Altura sobresaliente (mm) | 8.4 |
| Diámetro del estilo de punta (mm) | 0.9 |
| Diámetro del casquillo (mm) | 1.37 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 38 |
| Material del émbolo | Steel |
| Recubrimiento del émbolo | Progressive |
| Material del casquillo | Bronze |
| Recubrimiento del casquillo | Gold |
| Material del resorte | Spring steel |
| Recubrimiento del resorte | Silver |
| Especificaciones mecánicas | |
|---|---|
| Precarga (cN) | 200 |
| Fuerza del resorte (cN) | 300 |
| Recorrido nominal (mm) | 4.3 |
| Recorrido máximo (mm) | 6.4 |
| Precisión de punteo +/- (mm) | 0.08 |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 5 |
| Resistencia de contacto típica (mΩ) | 40 |
Gráficos
Beschreibung des Produkts
F10038S090P300HP (item number 1132220) is a Basic Contact Probe for repeatable temporary connections between the test system and a test point. With tip style 38 (Square lance 140°), F10038S090P300HP combines ICT/FCT use with a geometry intended for vias and solder pads where the edges can break through residues and oxide layers. F10038S090P300HP combines a pitch of 2.54 mm / 100 mil with tip style 38 (Square lance 140°) and a tip diameter of 0.9 mm. F10038S090P300HP operates with 300 cN spring force and 4.3 mm nominal travel. F10038S090P300HP is rated for 5 A continuous current with a typical contact resistance of 40 mΩ. The combination of P-Coating and HP spring preload makes F10038S090P300HP a version for contact points where residues or hard surface layers can make electrical contacting more demanding.