Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | F075 |
| Paso (mm/mil) | 1,90 / 75 |
| Temperatura | -45°C...+80°C |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 33.1 |
| Altura sobresaliente (mm) | 8.5 |
| Diámetro del estilo de punta (mm) | 1.2 |
| Diámetro del casquillo (mm) | 1.02 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 07 |
| Material del émbolo | Steel |
| Recubrimiento del émbolo | Longtime Gold |
| Material del casquillo | Bronze |
| Recubrimiento del casquillo | Gold |
| Material del resorte | Spring steel |
| Recubrimiento del resorte | Silver |
| Especificaciones mecánicas | |
|---|---|
| Precarga (cN) | 52 |
| Fuerza del resorte (cN) | 100 |
| Recorrido nominal (mm) | 4.3 |
| Recorrido máximo (mm) | 6.4 |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 4 |
| Resistencia de contacto típica (mΩ) | 20 |
Gráficos
Beschreibung des Produkts
As a Basic Contact Probe, F07507S120L100 (item number 1134710) establishes a spring-loaded electrical connection to the test point. With tip style 07 (Hexagonal 90° stepped), F07507S120L100 combines ICT/FCT use with a geometry intended for plated vias and pads where sharp edges penetrate contamination and oxide layers. F07507S120L100 combines a pitch of 1.9 mm / 75 mil with tip style 07 (Hexagonal 90° stepped) and a tip diameter of 1.2 mm. For F07507S120L100, spring force is 100 cN at a nominal travel of 4.3 mm. The electrical rating of F07507S120L100 combines 4 A continuous current with 20 mΩ typical contact resistance. The plunger in F07507S120L100 is made of steel and uses Longtime Gold plating.