Datos técnicos
| General | |
|---|---|
| Estructura | Coaxial Probe |
| Tipo/Familia | HF86 |
| Paso (mm/mil) | 7,40 / 290 |
| Temperatura | -45°C...+100°C |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 29.58 |
| Altura sobresaliente (mm) | 19.58 |
| Diámetro del estilo de punta (mm) | 4.8 |
| Distancia interior/exterior (mm) | 0.9 |
| Diámetro del estilo de punta (mm) 2 | 0.8 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 50 |
| Estilo de punta 2 | 02 |
| Material del estilo de punta | Beryllium copper |
| Recubrimiento del estilo de punta | Gold |
| Material del émbolo | Brass |
| Recubrimiento del émbolo | Gold |
| Material del casquillo | Brass |
| Recubrimiento del casquillo | Gold |
| Material del resorte | High-grade steel |
| Recubrimiento del resorte | Uncoated |
| Material del émbolo 2 | Beryllium copper |
| Recubrimiento del émbolo 2 | Gold |
| Material del resorte 2 | Spring steel |
| Recubrimiento del resorte 2 | Gold |
| Especificaciones mecánicas | |
|---|---|
| Precarga (cN) | 500 |
| Fuerza del resorte (cN) | 665 |
| Recorrido nominal (mm) | 2 |
| Recorrido máximo (mm) | 3 |
| Conexión | Plug |
| DUT | FAKRA-FEMALE |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 10 |
| Impedancia (Ω) | 50 |
| Frecuencia (GHz) | 6 |
| Corriente continua (A) 2 | 3 |
| Especificaciones de contactos internos | |
|---|---|
| Recorrido nominal (mm) 2 | 1.5 |
| Recorrido máximo (mm) 2 | 2.9 |
| Precarga (cN) 2 | 50 |
| Fuerza del resorte (cN) 2 | 110 |
Gráficos
Beschreibung des Produkts
The High Frequency Probe HF86FAKRAf016G775MCXfF (item number 1142304) is designed for reliable transmission of high-frequency signals in test and measurement applications. With a defined impedance of 50 Ω, HF86FAKRAf016G775MCXfF supports controlled signal routing and helps minimize reflections and signal loss at the test interface. The frequency range extends up to 6 GHz, and this version is intended for contacting FAKRA-FEMALE connectors. On HF86FAKRAf016G775MCXfF, spring forces of 665 cN on the outer contact and 110 cN on the inner contact provide defined mechanical contacting.