Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | F793 |
| Paso (mm/mil) | 1,90 / 75 |
| Temperatura | -45°C...+80°C |
| Definición adicional | HPL |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 38.8 |
| Altura sobresaliente (mm) | 14.2 |
| Diámetro del estilo de punta (mm) | 0.64 |
| Diámetro del casquillo (mm) | 1.02 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 33 |
| Material del émbolo | Steel |
| Recubrimiento del émbolo | Progressive |
| Material del casquillo | Nickel silver |
| Recubrimiento del casquillo | Gold |
| Material del resorte | Spring steel |
| Recubrimiento del resorte | Gold |
| Especificaciones mecánicas | |
|---|---|
| Precarga (cN) | 90 |
| Fuerza del resorte (cN) | 250 |
| Recorrido nominal (mm) | 8 |
| Recorrido máximo (mm) | 9 |
| Precisión de punteo +/- (mm) | 0.1 |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 4 |
| Resistencia de contacto típica (mΩ) | 20 |
Gráficos
Beschreibung des Produkts
F79333S064P250HPL (item number 1142584) is a Basic Contact Probe for repeatable temporary connections between the test system and a test point. With tip style 33 (Square lance 38°), F79333S064P250HPL combines ICT/FCT use with a geometry intended for vias and solder pads where the edges can break through residues and oxide layers. F79333S064P250HPL combines a pitch of 1.9 mm / 75 mil with tip style 33 (Square lance 38°) and a tip diameter of 0.64 mm. For F79333S064P250HPL, spring force is 250 cN at a nominal travel of 8 mm. The electrical rating of F79333S064P250HPL combines 4 A continuous current with 20 mΩ typical contact resistance. For demanding test points, F79333S064P250HPL combines functional Progressive Coating with the higher preload of the HP spring, supporting reliable contact on OSP surfaces and areas affected by flux or contamination.