Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | F100HP |
| Paso (mm/mil) | 2,54 / 100 |
| Temperatura | -45°C...+80°C |
| Definición adicional | HP |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 33.3 |
| Altura sobresaliente (mm) | 8.4 |
| Diámetro del estilo de punta (mm) | 0.9 |
| Diámetro del casquillo (mm) | 1.37 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 32 |
| Material del émbolo | Steel |
| Recubrimiento del émbolo | Progressive |
| Material del casquillo | Bronze |
| Recubrimiento del casquillo | Gold |
| Material del resorte | Spring steel |
| Recubrimiento del resorte | Silver |
| Especificaciones mecánicas | |
|---|---|
| Precarga (cN) | 130 |
| Fuerza del resorte (cN) | 200 |
| Recorrido nominal (mm) | 4.3 |
| Recorrido máximo (mm) | 6.4 |
| Precisión de punteo +/- (mm) | 0.08 |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 5 |
| Resistencia de contacto típica (mΩ) | 40 |
Beschreibung des Produkts
F10032S090P200HP (item number 1164516) is a Basic Contact Probe for repeatable temporary electrical connections between the test system and a test point. With tip style 32 (Rigid needle 10°), F10032S090P200HP combines ICT/FCT use with a geometry intended for solder pads and vias. F10032S090P200HP combines a pitch of 2.54 mm / 100 mil with tip style 32 (Rigid needle 10°) and a tip diameter of 0.9 mm. F10032S090P200HP operates with 200 cN spring force and 4.3 mm nominal travel. The continuous-current rating of F10032S090P200HP is 5 A. For demanding test points, F10032S090P200HP combines functional Progressive Coating with the higher preload of the HP spring, supporting reliable contact on OSP surfaces and areas affected by flux or contamination.