Données techniques
| Généralités | |
|---|---|
| Structure | Basic Contact Probe |
| Type/famille | F100HP |
| Pas (mm/mil) | 2,54 / 100 |
| Température | -45°C...+80°C |
| Définition complémentaire | HP |
| Dimensions | |
|---|---|
| Longueur totale (mm) | 33.3 |
| Hauteur hors tout (mm) | 8.4 |
| Diamètre du style de pointe (mm) | 0.9 |
| Diamètre du fût (mm) | 1.37 |
| Matériaux et surfaces | |
|---|---|
| Style de pointe | 32 |
| Matériau du piston | Steel |
| Revêtement du piston | Progressive |
| Matériau du fût | Bronze |
| Revêtement du fût | Gold |
| Matériau du ressort | Spring steel |
| Revêtement du ressort | Silver |
| Spécifications mécaniques | |
|---|---|
| Précontrainte (cN) | 200 |
| Force du ressort (cN) | 300 |
| Course nominale (mm) | 4.3 |
| Course maximale (mm) | 6.4 |
| Précision de pointage +/- (mm) | 0.08 |
| Spécifications électriques | |
|---|---|
| Courant continu (A) | 5 |
| Résistance de contact typique (mΩ) | 40 |
Graphiques
Beschreibung des Produkts
The Basic Contact Probe F10032S090P300HP (item number 1014293) is a spring-loaded probe for temporary electrical contact with test points. With tip style 32 (Rigid needle 10°), F10032S090P300HP combines ICT/FCT use with a geometry intended for solder pads and vias. F10032S090P300HP combines a pitch of 2.54 mm / 100 mil with tip style 32 (Rigid needle 10°) and a tip diameter of 0.9 mm. For F10032S090P300HP, spring force is 300 cN at a nominal travel of 4.3 mm. F10032S090P300HP is rated for 5 A continuous current with a typical contact resistance of 40 mΩ. For demanding test points, F10032S090P300HP combines functional Progressive Coating with the higher preload of the HP spring, supporting reliable contact on OSP surfaces and areas affected by flux or contamination.