Données techniques
| Généralités | |
|---|---|
| Structure | Basic Contact Probe |
| Type/famille | F772 |
| Pas (mm/mil) | 2,54 / 100 |
| Température | -45°C...+80°C |
| Définition complémentaire | EXX |
| Dimensions | |
|---|---|
| Longueur totale (mm) | 35 |
| Hauteur hors tout (mm) | 13 |
| Diamètre du style de pointe (mm) | 1.8 |
| Diamètre du fût (mm) | 1.6 |
| Diamètre de la bague de serrage (mm) | 2.04 |
| Matériaux et surfaces | |
|---|---|
| Style de pointe | 05 |
| Matériau du piston | Steel |
| Revêtement du piston | Progressive |
| Matériau du fût | Nickel silver |
| Revêtement du fût | Gold |
| Matériau du ressort | Spring steel |
| Revêtement du ressort | Silver |
| Spécifications mécaniques | |
|---|---|
| Précontrainte (cN) | 60 |
| Force du ressort (cN) | 150 |
| Course nominale (mm) | 4 |
| Course maximale (mm) | 5 |
| Précision de pointage +/- (mm) | 0.08 |
| Spécifications électriques | |
|---|---|
| Résistance de contact typique (mΩ) | 25 |
Graphiques
Beschreibung des Produkts
F77205S180P150E13 (item number 1148988) is a Basic Contact Probe for repeatable temporary electrical connections between the test system and a test point. With tip style 05 (Concave stepped), F77205S180P150E13 combines ICT/FCT use with a geometry intended for pins and wire-wrap posts with a guided, smooth contacting action. F77205S180P150E13 combines a pitch of 2.54 mm / 100 mil with tip style 05 (Concave stepped) and a tip diameter of 1.8 mm. For F77205S180P150E13, spring force is 150 cN at a nominal travel of 4 mm. The plunger in F77205S180P150E13 is made of steel and uses Progressive Coating. On F77205S180P150E13, Progressive Coating is intended for demanding test points such as OSP surfaces and contact areas affected by flux residues or contamination.