Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | F502 |
| Paso (mm/mil) | 2,54 / 100 |
| Temperatura | -45°C...+80°C |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 24.7 |
| Altura sobresaliente (mm) | 6.2 |
| Diámetro del estilo de punta (mm) | 0.76 |
| Diámetro del casquillo (mm) | 1.37 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 03 |
| Material del émbolo | Steel |
| Recubrimiento del émbolo | Nickel |
| Material del casquillo | Bronze |
| Recubrimiento del casquillo | Silver |
| Material del resorte | Spring steel |
| Recubrimiento del resorte | Silver |
| Especificaciones mecánicas | |
|---|---|
| Precarga (cN) | 60 |
| Fuerza del resorte (cN) | 130 |
| Recorrido nominal (mm) | 2.7 |
| Recorrido máximo (mm) | 4.1 |
| Precisión de punteo +/- (mm) | 0.05 |
| DUT | LP1800 |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 5 |
| Resistencia de contacto típica (mΩ) | 55 |
Gráficos
Beschreibung des Produkts
As a Basic Contact Probe, F50203S076N130 (item number 1001375) establishes a spring-loaded electrical connection to the test point. With tip style 03 (Conical 60°), F50203S076N130 combines ICT/FCT use with a geometry intended for solder pads and vias. The design combines a pitch of 2.54 mm / 100 mil with tip style 03 (Conical 60°) and a tip diameter of 0.76 mm. For F50203S076N130, spring force is 130 cN at a nominal travel of 2.7 mm. The electrical rating of F50203S076N130 combines 5 A continuous current with 55 mΩ typical contact resistance. The plunger in F50203S076N130 is made of steel and is Nickel-plated.