Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | F788 |
| Paso (mm/mil) | 1,27 / 50 |
| Temperatura | -45°C...+80°C |
| Definición adicional | S1 |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 45 |
| Altura sobresaliente (mm) | 14 |
| Diámetro del estilo de punta (mm) | 0.5 |
| Diámetro del casquillo (mm) | 0.78 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 33 |
| Material del émbolo | Steel |
| Recubrimiento del émbolo | Longtime Gold |
| Material del casquillo | Bronze |
| Recubrimiento del casquillo | Gold |
| Material del resorte | Spring steel |
| Recubrimiento del resorte | Silver |
| Especificaciones mecánicas | |
|---|---|
| Precarga (cN) | 30 |
| Fuerza del resorte (cN) | 150 |
| Recorrido nominal (mm) | 4.3 |
| Recorrido máximo (mm) | 6.4 |
| Precisión de punteo +/- (mm) | 0.1 |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 2 |
| Resistencia de contacto típica (mΩ) | 20 |
Gráficos
Beschreibung des Produkts
The Basic Contact Probe F78833S050L150LS1 (item number 1006259) is a spring-loaded probe for temporary electrical contact with test points. With tip style 33 (Square lance 38°), F78833S050L150LS1 combines ICT/FCT use with a geometry intended for vias and solder pads where the edges can break through residues and oxide layers. F78833S050L150LS1 combines a pitch of 1.27 mm / 50 mil with tip style 33 (Square lance 38°) and a tip diameter of 0.5 mm. For F78833S050L150LS1, spring force is 150 cN at a nominal travel of 4.3 mm. The electrical rating of F78833S050L150LS1 combines 2 A continuous current with 20 mΩ typical contact resistance. The plunger in F78833S050L150LS1 is made of steel and uses Longtime Gold plating.