Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | F588 |
| Paso (mm/mil) | 2,54 / 100 |
| Temperatura | -45°C...+80°C |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 39 |
| Altura sobresaliente (mm) | 14.1 |
| Diámetro del estilo de punta (mm) | 0.9 |
| Diámetro del casquillo (mm) | 1.37 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 43 |
| Material del émbolo | Steel |
| Recubrimiento del émbolo | Progressive |
| Material del casquillo | Bronze |
| Recubrimiento del casquillo | Gold |
| Material del resorte | Spring steel |
| Recubrimiento del resorte | Silver |
| Especificaciones mecánicas | |
|---|---|
| Precarga (cN) | 50 |
| Fuerza del resorte (cN) | 180 |
| Recorrido nominal (mm) | 9.3 |
| Recorrido máximo (mm) | 11.7 |
| Precisión de punteo +/- (mm) | 0.1 |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 5 |
| Resistencia de contacto típica (mΩ) | 60 |
Gráficos
Beschreibung des Produkts
F58843S090P180 (item number 1010469) is a Basic Contact Probe for repeatable temporary electrical connections between the test system and a test point. With tip style 43 (Square lance 90°), F58843S090P180 combines ICT/FCT use with a geometry intended for vias and solder pads where the edges can break through residues and oxide layers. F58843S090P180 combines a pitch of 2.54 mm / 100 mil with tip style 43 (Square lance 90°) and a tip diameter of 0.9 mm. F58843S090P180 operates with 180 cN spring force and 9.3 mm nominal travel. The continuous-current rating of F58843S090P180 is 5 A. On F58843S090P180, Progressive Coating is intended for demanding test points such as OSP surfaces and contact areas affected by flux residues or contamination.