Données techniques
| Généralités | |
|---|---|
| Structure | Basic Contact Probe |
| Type/famille | F588 |
| Pas (mm/mil) | 2,54 / 100 |
| Température | -45°C...+80°C |
| Dimensions | |
|---|---|
| Longueur totale (mm) | 39 |
| Hauteur hors tout (mm) | 14.1 |
| Diamètre du style de pointe (mm) | 0.9 |
| Diamètre du fût (mm) | 1.37 |
| Matériaux et surfaces | |
|---|---|
| Style de pointe | 43 |
| Matériau du piston | Steel |
| Revêtement du piston | Progressive |
| Matériau du fût | Bronze |
| Revêtement du fût | Gold |
| Matériau du ressort | Spring steel |
| Revêtement du ressort | Silver |
| Spécifications mécaniques | |
|---|---|
| Précontrainte (cN) | 50 |
| Force du ressort (cN) | 180 |
| Course nominale (mm) | 9.3 |
| Course maximale (mm) | 11.7 |
| Précision de pointage +/- (mm) | 0.1 |
| Spécifications électriques | |
|---|---|
| Courant continu (A) | 5 |
| Résistance de contact typique (mΩ) | 60 |
Graphiques
Beschreibung des Produkts
F58843S090P180 (item number 1010469) is a Basic Contact Probe for repeatable temporary electrical connections between the test system and a test point. With tip style 43 (Square lance 90°), F58843S090P180 combines ICT/FCT use with a geometry intended for vias and solder pads where the edges can break through residues and oxide layers. F58843S090P180 combines a pitch of 2.54 mm / 100 mil with tip style 43 (Square lance 90°) and a tip diameter of 0.9 mm. F58843S090P180 operates with 180 cN spring force and 9.3 mm nominal travel. The continuous-current rating of F58843S090P180 is 5 A. On F58843S090P180, Progressive Coating is intended for demanding test points such as OSP surfaces and contact areas affected by flux residues or contamination.