Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | F051 |
| Paso (mm/mil) | 1,27 / 50 |
| Temperatura | -45°C...+80°C |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 48.5 |
| Altura sobresaliente (mm) | 12.2 |
| Diámetro del estilo de punta (mm) | 0.5 |
| Diámetro del casquillo (mm) | 0.78 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 43 |
| Material del émbolo | Steel |
| Recubrimiento del émbolo | Progressive |
| Material del casquillo | Bronze |
| Recubrimiento del casquillo | Gold |
| Material del resorte | Spring steel |
| Recubrimiento del resorte | Silver |
| Especificaciones mecánicas | |
|---|---|
| Precarga (cN) | 35 |
| Fuerza del resorte (cN) | 150 |
| Recorrido nominal (mm) | 8 |
| Recorrido máximo (mm) | 10 |
| Precisión de punteo +/- (mm) | 0.05 |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 3 |
| Resistencia de contacto típica (mΩ) | 40 |
Gráficos
Beschreibung des Produkts
The Basic Contact Probe F05143S050P150 (item number 1011291) is a spring-loaded probe for temporary electrical contact with test points. With tip style 43 (Square lance 90°), F05143S050P150 combines ICT/FCT use with a geometry intended for vias and solder pads where the edges can break through residues and oxide layers. F05143S050P150 combines a pitch of 1.27 mm / 50 mil with tip style 43 (Square lance 90°) and a tip diameter of 0.5 mm. For F05143S050P150, spring force is 150 cN at a nominal travel of 8 mm. F05143S050P150 is rated for 3 A continuous current with a typical contact resistance of 40 mΩ. The plunger in F05143S050P150 is made of steel and uses Progressive Coating.