Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | F075HP |
| Paso (mm/mil) | 1,90 / 75 |
| Temperatura | -45°C...+80°C |
| Definición adicional | HPL |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 35.1 |
| Altura sobresaliente (mm) | 10.2 |
| Diámetro del estilo de punta (mm) | 0.64 |
| Diámetro del casquillo (mm) | 1.02 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 32 |
| Material del émbolo | Steel |
| Recubrimiento del émbolo | Progressive |
| Material del casquillo | Bronze |
| Recubrimiento del casquillo | Gold |
| Material del resorte | Spring steel |
| Recubrimiento del resorte | Silver |
| Especificaciones mecánicas | |
|---|---|
| Precarga (cN) | 130 |
| Fuerza del resorte (cN) | 250 |
| Recorrido nominal (mm) | 4.3 |
| Recorrido máximo (mm) | 6.4 |
| Precisión de punteo +/- (mm) | 0.08 |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 4 |
| Resistencia de contacto típica (mΩ) | 40 |
Gráficos
Beschreibung des Produkts
F07532S064P250HPL (item number 1014299) is a Basic Contact Probe for repeatable temporary connections between the test system and a test point. With tip style 32 (Rigid needle 10°), F07532S064P250HPL combines ICT/FCT use with a geometry intended for solder pads and vias. F07532S064P250HPL combines a pitch of 1.9 mm / 75 mil with tip style 32 (Rigid needle 10°) and a tip diameter of 0.64 mm. F07532S064P250HPL operates with 250 cN spring force and 4.3 mm nominal travel. F07532S064P250HPL is rated for 4 A continuous current with a typical contact resistance of 40 mΩ. On F07532S064P250HPL, Progressive Coating works together with the higher preload of the HP version, targeting test points affected by OSP, flux, oxidation or other contamination rather than treating the coating as an isolated feature.