Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | F786 |
| Paso (mm/mil) | 2,54 / 100 |
| Temperatura | -45°C...+80°C |
| Definición adicional | HP |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 38 |
| Altura sobresaliente (mm) | 16 |
| Diámetro del estilo de punta (mm) | 1.3 |
| Diámetro del casquillo (mm) | 1.66 |
| Diámetro del collar (mm) | 2.04 |
| Diámetro del anillo de presión (mm) | 2.04 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 33 |
| Material del émbolo | Steel |
| Recubrimiento del émbolo | Progressive |
| Material del casquillo | Nickel silver |
| Recubrimiento del casquillo | Gold |
| Material del resorte | Spring steel |
| Recubrimiento del resorte | Silver |
| Especificaciones mecánicas | |
|---|---|
| Precarga (cN) | 180 |
| Fuerza del resorte (cN) | 500 |
| Recorrido nominal (mm) | 6.4 |
| Recorrido máximo (mm) | 8 |
| Precisión de punteo +/- (mm) | 0.1 |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 5 |
| Resistencia de contacto típica (mΩ) | 50 |
Gráficos
Beschreibung des Produkts
The Basic Contact Probe F78633S130P500HP (item number 1015524) is a spring-loaded probe for temporary electrical contact with test points. With tip style 33 (Square lance 38°), F78633S130P500HP combines ICT/FCT use with a geometry intended for vias and solder pads where the edges can break through residues and oxide layers. F78633S130P500HP combines a pitch of 2.54 mm / 100 mil with tip style 33 (Square lance 38°) and a tip diameter of 1.3 mm. Spring force is 500 cN at a nominal travel of 6.4 mm. The electrical rating of F78633S130P500HP combines 5 A continuous current with 50 mΩ typical contact resistance. On F78633S130P500HP, Progressive Coating and the increased spring preload of the HP version form a combined solution for difficult ICT/FCT contacting conditions involving OSP, flux residues, oxidation or contamination.