Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | F588 |
| Paso (mm/mil) | 2,54 / 100 |
| Temperatura | -45°C...+80°C |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 39 |
| Altura sobresaliente (mm) | 14.1 |
| Diámetro del estilo de punta (mm) | 1.5 |
| Diámetro del casquillo (mm) | 1.37 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 35 |
| Material del émbolo | Steel |
| Recubrimiento del émbolo | Progressive |
| Material del casquillo | Bronze |
| Recubrimiento del casquillo | Gold |
| Material del resorte | Spring steel |
| Recubrimiento del resorte | Silver |
| Especificaciones mecánicas | |
|---|---|
| Precarga (cN) | 80 |
| Fuerza del resorte (cN) | 300 |
| Recorrido nominal (mm) | 9.3 |
| Recorrido máximo (mm) | 11.7 |
| Precisión de punteo +/- (mm) | 0.1 |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 5 |
| Resistencia de contacto típica (mΩ) | 60 |
Gráficos
Beschreibung des Produkts
F58835S150P300 (item number 1041857) is a Basic Contact Probe for repeatable temporary connections between the test system and a test point. With tip style 35 (3-point crown stepped (self-cleaning)), F58835S150P300 combines ICT/FCT use with a geometry intended for solder pads and vias. F58835S150P300 combines a pitch of 2.54 mm / 100 mil with tip style 35 (3-point crown stepped (self-cleaning)) and a tip diameter of 1.5 mm. For F58835S150P300, spring force is 300 cN at a nominal travel of 9.3 mm. F58835S150P300 is rated for 5 A continuous current with a typical contact resistance of 60 mΩ. The plunger in F58835S150P300 is made of steel and uses Progressive Coating.