Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | F075 |
| Paso (mm/mil) | 1,90 / 75 |
| Temperatura | -45°C...+80°C |
| Definición adicional | ML |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 38.1 |
| Altura sobresaliente (mm) | 8.4 |
| Diámetro del estilo de punta (mm) | 0.64 |
| Diámetro del casquillo (mm) | 1.02 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 18 |
| Material del émbolo | Steel |
| Recubrimiento del émbolo | Longtime Gold |
| Material del casquillo | Bronze |
| Recubrimiento del casquillo | Gold |
| Material del resorte | Spring steel |
| Recubrimiento del resorte | Silver |
| Especificaciones mecánicas | |
|---|---|
| Precarga (cN) | 80 |
| Fuerza del resorte (cN) | 200 |
| Recorrido nominal (mm) | 4.3 |
| Recorrido máximo (mm) | 6.4 |
| Precisión de punteo +/- (mm) | 0.08 |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 4 |
| Resistencia de contacto típica (mΩ) | 50 |
Gráficos
Beschreibung des Produkts
F07518S064L200ML (item number 1122794) is a Basic Contact Probe for repeatable temporary connections between the test system and a test point. With tip style 18 (Conical 30°), F07518S064L200ML combines ICT/FCT use with a geometry intended for solder pads and vias. F07518S064L200ML combines a pitch of 1.9 mm / 75 mil with tip style 18 (Conical 30°) and a tip diameter of 0.64 mm. For F07518S064L200ML, spring force is 200 cN at a nominal travel of 4.3 mm. F07518S064L200ML is rated for 4 A continuous current with a typical contact resistance of 50 mΩ. The plunger in F07518S064L200ML is made of steel and uses Longtime Gold plating.