Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | F111 |
| Paso (mm/mil) | 1,27 / 50 |
| Temperatura | -45°C...+200°C |
| Definición adicional | H |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 16.5 |
| Altura sobresaliente (mm) | 4 |
| Diámetro del estilo de punta (mm) | 0.53 |
| Diámetro del casquillo (mm) | 0.69 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 21 |
| Material del émbolo | Steel |
| Recubrimiento del émbolo | Longtime Gold |
| Material del casquillo | Bronze |
| Recubrimiento del casquillo | Gold |
| Material del resorte | High-grade steel |
| Recubrimiento del resorte | Uncoated |
| Especificaciones mecánicas | |
|---|---|
| Precarga (cN) | 40 |
| Fuerza del resorte (cN) | 95 |
| Recorrido nominal (mm) | 2 |
| Recorrido máximo (mm) | 2.8 |
| Precisión de punteo +/- (mm) | 0.09 |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 3 |
| Resistencia de contacto típica (mΩ) | 65 |
Gráficos
Beschreibung des Produkts
F11121S053L095H (item number 1143895) is a Basic Contact Probe for repeatable temporary connections between the test system and a test point. With tip style 21 (4-point crown (self-cleaning)), F11121S053L095H combines ICT/FCT use with a geometry intended for pad surfaces and soldered pins where the crown geometry can penetrate residues or oxide layers. F11121S053L095H combines a pitch of 1.27 mm / 50 mil with tip style 21 (4-point crown (self-cleaning)) and a tip diameter of 0.53 mm. For F11121S053L095H, spring force is 95 cN at a nominal travel of 2 mm. F11121S053L095H is rated for 3 A continuous current with a typical contact resistance of 65 mΩ. The plunger in F11121S053L095H is made of steel and uses Longtime Gold plating. The final H identifies the high-temperature version; F11121S053L095H is suitable for applications up to 200 °C.