Données techniques
| Généralités | |
|---|---|
| Structure | Basic Contact Probe |
| Type/famille | F075HP |
| Pas (mm/mil) | 1,90 / 75 |
| Température | -45°C...+80°C |
| Définition complémentaire | HPL |
| Dimensions | |
|---|---|
| Longueur totale (mm) | 35.1 |
| Hauteur hors tout (mm) | 10.2 |
| Diamètre du style de pointe (mm) | 0.64 |
| Diamètre du fût (mm) | 1.02 |
| Matériaux et surfaces | |
|---|---|
| Style de pointe | 62 |
| Matériau du piston | Steel |
| Revêtement du piston | Progressive |
| Matériau du fût | Bronze |
| Revêtement du fût | Gold |
| Matériau du ressort | Spring steel |
| Revêtement du ressort | Silver |
| Spécifications mécaniques | |
|---|---|
| Précontrainte (cN) | 120 |
| Force du ressort (cN) | 200 |
| Course nominale (mm) | 4.3 |
| Course maximale (mm) | 6.4 |
| Précision de pointage +/- (mm) | 0.08 |
| Spécifications électriques | |
|---|---|
| Courant continu (A) | 4 |
| Résistance de contact typique (mΩ) | 40 |
Graphiques
Beschreibung des Produkts
The Basic Contact Probe F07562S064P200HPL (item number 1010290) is a spring-loaded probe for temporary electrical contact with test points. With tip style 62 (Triangular 30°), F07562S064P200HPL combines ICT/FCT use with a geometry intended for vias and solder pads where sharp edges can penetrate flux residues or oxide layers. F07562S064P200HPL combines a pitch of 1.9 mm / 75 mil with tip style 62 (Triangular 30°) and a tip diameter of 0.64 mm. F07562S064P200HPL operates with 200 cN spring force and 4.3 mm nominal travel. F07562S064P200HPL is rated for 4 A continuous current with a typical contact resistance of 40 mΩ. On F07562S064P200HPL, Progressive Coating and the increased spring preload of the HP version form a combined solution for difficult ICT/FCT contacting conditions involving OSP, flux residues, oxidation or contamination.