Données techniques
| Généralités | |
|---|---|
| Structure | Basic Contact Probe |
| Type/famille | F075 |
| Pas (mm/mil) | 1,90 / 75 |
| Température | -45°C...+80°C |
| Dimensions | |
|---|---|
| Longueur totale (mm) | 33.1 |
| Hauteur hors tout (mm) | 8.5 |
| Diamètre du style de pointe (mm) | 0.64 |
| Diamètre du fût (mm) | 1.02 |
| Matériaux et surfaces | |
|---|---|
| Style de pointe | 10 |
| Matériau du piston | Steel |
| Revêtement du piston | Progressive |
| Matériau du fût | Bronze |
| Revêtement du fût | Gold |
| Matériau du ressort | Spring steel |
| Revêtement du ressort | Silver |
| Spécifications mécaniques | |
|---|---|
| Précontrainte (cN) | 118 |
| Force du ressort (cN) | 200 |
| Course nominale (mm) | 4.3 |
| Course maximale (mm) | 6.4 |
| Précision de pointage +/- (mm) | 0.08 |
| Spécifications électriques | |
|---|---|
| Courant continu (A) | 4 |
| Résistance de contact typique (mΩ) | 20 |
Graphiques
Beschreibung des Produkts
The Basic Contact Probe F07510S064P200HP (item number 1143889) is a spring-loaded probe for temporary electrical contact with test points. With tip style 10 (Flexible needle), F07510S064P200HP combines ICT/FCT use with a geometry intended for solder pads and vias. F07510S064P200HP combines a pitch of 1.9 mm / 75 mil with tip style 10 (Flexible needle) and a tip diameter of 0.64 mm. For F07510S064P200HP, spring force is 200 cN at a nominal travel of 4.3 mm. The electrical rating of F07510S064P200HP combines 4 A continuous current with 20 mΩ typical contact resistance. The P/HP configuration of F07510S064P200HP pairs contamination-resistant Progressive Coating with increased spring preload so that difficult surfaces such as OSP, oxidized pads or flux-contaminated test points can be contacted more effectively.