Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | I- |
| Paso (mm/mil) | 4,70 / 185 |
| Temperatura | -45°C...+250°C |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 18 |
| Diámetro del estilo de punta (mm) | 4 |
| Diámetro del casquillo (mm) | 2.45 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 16 |
| Material del émbolo | Brass |
| Recubrimiento del émbolo | Rhodium |
| Material del casquillo | Brass |
| Recubrimiento del casquillo | Uncoated |
| Material del resorte | Brass |
| Recubrimiento del resorte | Uncoated |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 30 |
Gráficos
Beschreibung des Produkts
As an Interface Probe, I-P1 (item number 1001779) provides a repeatable electrical connection within the test interface. I-P1 provides a standardized contact or interface element for repeatable transfer of test and measurement signals between fixture and test system. The design combines a pitch of 4.7 mm / 185 mil with tip style 16 (Flat) and a tip diameter of 4 mm. I-P1 is specified for 30 A continuous current. The plunger is made of brass and is Rhodium-plated.