Données techniques
| Généralités | |
|---|---|
| Structure | Basic Contact Probe |
| Type/famille | I- |
| Pas (mm/mil) | 4,70 / 185 |
| Température | -45°C...+250°C |
| Dimensions | |
|---|---|
| Longueur totale (mm) | 18 |
| Diamètre du style de pointe (mm) | 4 |
| Diamètre du fût (mm) | 2.45 |
| Matériaux et surfaces | |
|---|---|
| Style de pointe | 16 |
| Matériau du piston | Brass |
| Revêtement du piston | Rhodium |
| Matériau du fût | Brass |
| Revêtement du fût | Uncoated |
| Matériau du ressort | Brass |
| Revêtement du ressort | Uncoated |
| Spécifications électriques | |
|---|---|
| Courant continu (A) | 30 |
Graphiques
Beschreibung des Produkts
As an Interface Probe, I-P1 (item number 1001779) provides a repeatable electrical connection within the test interface. I-P1 provides a standardized contact or interface element for repeatable transfer of test and measurement signals between fixture and test system. The design combines a pitch of 4.7 mm / 185 mil with tip style 16 (Flat) and a tip diameter of 4 mm. I-P1 is specified for 30 A continuous current. The plunger is made of brass and is Rhodium-plated.