Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | I- |
| Paso (mm/mil) | 3,00 / 118 |
| Temperatura | -45°C...+250°C |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 21.62 |
| Diámetro del estilo de punta (mm) | 2.5 |
| Diámetro del casquillo (mm) | 1.36 |
| Diámetro del anillo de presión (mm) | 1.5 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 16 |
| Material del émbolo | Brass |
| Recubrimiento del émbolo | Gold |
| Material del casquillo | Brass |
| Recubrimiento del casquillo | Uncoated |
| Material del resorte | Brass |
| Recubrimiento del resorte | Uncoated |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 10 |
Gráficos
Beschreibung des Produkts
The Interface Probe I-G1S2 (item number 1006531) is designed to transfer electrical signals between the test fixture and test system. I-G1S2 provides a standardized contact or interface element for repeatable transfer of test and measurement signals between fixture and test system. The design combines a pitch of 3 mm / 118 mil with tip style 16 (Flat) and a tip diameter of 2.5 mm. I-G1S2 is specified for 10 A continuous current. The plunger in I-G1S2 is made of brass and is gold-plated.