Technical data
| General | |
|---|---|
| Structure | Basic Contact Probe |
| Type/family | F075HP |
| Pitch (mm/mil) | 1,90 / 75 |
| Temperature | -45°C...+80°C |
| Additional definition | HP |
| Dimensions | |
|---|---|
| Total length (mm) | 33.1 |
| Protrusion height (mm) | 8.2 |
| Tip style diameter (mm) | 0.64 |
| Barrel diameter (mm) | 1.02 |
| Materials and surfaces | |
|---|---|
| Tip style | 32 |
| Plunger material | Steel |
| Plunger plating | Progressive |
| Barrel material | Bronze |
| Barrel plating | Gold |
| Spring material | Spring steel |
| Spring plating | Silver |
| Mechanical specifications | |
|---|---|
| Preload (cN) | 130 |
| Spring force (cN) | 250 |
| Nominal travel (mm) | 4.3 |
| Maximum travel (mm) | 6.4 |
| Pointing accuracy +/- (mm) | 0.08 |
| Electrical specifications | |
|---|---|
| Continuous current (A) | 4 |
| Typical contact resistance (mOhm) | 40 |
Graphics
Beschreibung des Produkts
The Basic Contact Probe F07532S064P250HP (item number 1014301) is a spring-loaded probe for temporary electrical contact with test points. With tip style 32 (Rigid needle 10°), F07532S064P250HP combines ICT/FCT use with a geometry intended for solder pads and vias. F07532S064P250HP combines a pitch of 1.9 mm / 75 mil with tip style 32 (Rigid needle 10°) and a tip diameter of 0.64 mm. F07532S064P250HP operates with 250 cN spring force and 4.3 mm nominal travel. F07532S064P250HP is rated for 4 A continuous current with a typical contact resistance of 40 mΩ. On F07532S064P250HP, Progressive Coating and the increased spring preload of the HP version form a combined solution for difficult ICT/FCT contacting conditions involving OSP, flux residues, oxidation or contamination.